Danh mục tin
The ESL-2805 is the smaller of the two models using four panels rather than the six of the larger model. The inner two panels of the ESL-2805s construction, again utilise the concentric anode rings for point source imaging, and the outer rings are again linear in their response. Whilst absolute bass extension and dynamic ability is less than it's larger brother, the ESL-2805 offers a sublime performance. The clarity of mid-range for which the Quad are most famed is fully in evidence, as is the sparkling detail and transparency that has long been the hallmark of this series. Their response characteristics are virtually identical and a base weight of 34.8kg together with the rigid bracing, ensures they are suitably deep in bass and dynamic enough to fill all but the largest of listening rooms. For the Quad aficionado without the need or desire for the additional bass extension of the larger model this, the smaller of the ESLs is still regarded as the pinnacle of electrostatic refinement.
CONSTRUCTION Format: Floor standing dipole with 3° fixed tilt blackType Multiple Electrostatic Drive MembranesMembrane Ultra Low Mass (0.5gm) Tensioned FilmNo. of Panel Elements 4Time Delay Progressive Concentric RingsChassis Structure Heavy Duty Composite Aluminium / SteelACOUSTIC PERFORMANCE Maximum Output 2 N/㎡ at 2m on axisSensitivity 1.5 mbar per volt referred to 1m(86dB/2.83V RMS equivalent)Impedance 8 Ohms nominalImpedance Variation 4 - 15 OhmsMaximum Input Continuous input voltage (RMS): 10VProgramme Peak for undistorted output: 40VPermitted peak input: 55VFrequency Reponse 37Hz - 21kHz (-6dB)33Hz - 23kHz (useable)Directivity Index See Polar DiagramsDistortion (100dB @ 1M) Above 1000Hz 0.15%Above 100Hz 0.5%Above 50Hz 1.0%Directivity Index See Polar DiagramsELECTRICAL AC Input 220 - 240V or 110-120VPower Fuse 63 mA anti-surge, 200-240V100 mA anti-surge, 100-120VGENERAL Power Consumption 6WDimension (H × W × D) 1040 × 695 × 385 (mm)(add 25-55mm for feet)Net Weight 34.8 kg each
Note:The right is reserved to alter performance, specification and appearance as required