PROGRAMME 30E/30ET

2-Way, 5"(5 1/4") high power woofer 75-20kHz frequency response (+/-3dB) 8 ohm system impedance, Continuous 50W / Music 100W / Peak 200W 1" (25.4mm) Mylar Dome drive unit Low distortion, high power woofer High strength MDF cabinet Pro-tech® (PTC) driver protection Four (4) M6 hanging points Parallel Spring crimp input connectors Available with 100 Volt Transformer (T version) Universal Bracket Included

The Programme 30E/30ET loudspeaker system is designed to deliver accurate, high power sound in a lightweight, small and easy to install package.

From the selection of components, to the High Frequency Driver protection circuit pro-tech®(PTC) the Programme 30E is designed from the ground up to be a workhorse. Feature laden and powerful, the Programme 30E is the best choice for a small, big sounding loudspeaker.

The Programme 30ET speaker is used in constant voltage distributed systems. With an internal 70v/100v transformer, you can economically install background music or paging system, while still only using one (70v/100v) amplifier.

The compact, lightweight Programme 30E/30ET is available in Black and White. They can be oriented in a vertical or horizontal position. All models have been designed for tabletop or bookshelf installation or, with the use of the included brackets they can be mounted on the wall or ceiling.

SPECIFICATIONS
MODEL PROGRAMME 30E/30ET
GENERAL INFO  
SYSTEM TYPE 5"(5 1/4") 2-way with 100V transformer (T model)
FREQUENCY RESPONSE +/- 3DB 75Hz-20KHz
SENSITIVITY (DB 1W@1M) 86dB
SYSTEM IMPEDANCE 8 ohm
MAXIMUM SPL PEAK DB 109dB
POWER HANDLING (WATTS)  
CONTINUOUS RMS 50W
PROGRAM 100W
PEAK 200W, Transformer Taps (100V) 1.25/2.5/5/10W(30ET)
LF DRIVER  
LF DRIVER SIZE MM / INCHES 5"(5 1/4")
HF SECTION  
HF DIAPHRAGM MATERIAL mylar Dome
HF EXIT SIZE MM / INCHES 1"
CROSSOVER SECTION  
CROSSOVER FREQUENCY / FILTER 2.3KHZ
HF DRIVER PROTECTION Pro-Tech(PTC)
PHYSICAL FEATURES  
FINISH black sandex vinyl
CONSTRUCTION MATERIAL MDF board
SUSPENSION POINTS M6X4
GRILLE black full(cloth)
STAND ADAPTER - BOTTOM n/a
CASTORS n/a
ENCLOSURE TYPE rectangle, foam with black bracket
IN / OUT PANEL (SPEAKER LEVEL)  
INPUT CONNECTOR bare wire connector
DIMENSIONS & WEIGHT  
HEIGHT ( MM / INS ) 233.5
WIDTH FRONT / REAR / MM / INS 166
DEPTH ( MM / INS ) 152
NET WEIGHT ( KG / LBS ) 4.52kg/5.12kg (T) in pair
GROSS WEIGHT ( KG / LBS ) 6.26kg/6.86kg (T) in pair

Sản phẩm khác