QC-twentyfour P - Phono Stage Pre Amplifier

For the connoisseur, however, there is the Quad QC-24 dedicated valve phono stage. This has been designed for Quad by valve supremo Tim DeParavicini - probably the finest valve amplifier designer in the world today. It has been voiced by the finest ears in the industry and will add an entirely new dimension to your enjoyment of vinyl recordings. This unit features a moving magnet/ moving coil toggle switch on the rear, a choice of input sensitivities and a direct full level output or variable level output if you wish to connect directly to a power amplifier.
Valve Complement 4 x 6111
Total Harmonic Distortion  
Frequency Response (RIAA/IEC equalisation) 20Hz - 20kHz (+/-0.5dB)
Hum and Noise(mm position,input shorted) Better than 60dB
Input Impedance  
Moving Magnet 47kΩ
Moving Coil 10Ω
Stage Gain  
High Sensitivity 1.3mV (MM)/130µV (MC)
Medium Sensitivity 2.6mV (MM) / 260µV (MC)
Low Sensitivity 5.2mV (MM) / 520µV (MC)
Nominal Output Level(ref 5.2mV, MM, Low) 1.0V
Inputs Selectable MM/MC cartridge
Outputs 1 x Fixed line level, 1 x Variable line level
Power Consumption 15VA maximum
Dimensions (H x W x D) 90 x 220 x 300(mm)

Note:The right is reserved to alter performance, specification and appearance as required

Sản phẩm khác