QC-twentyfour - Pre Amplifier

For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording. There are two options for adding such functionality to our valve pre-amplifiers. A solid-state module is available for the standard QC-twenty four pre-amplifier (known as the QC-24 phono stage), which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later.
Valve Complement 1x 6111 twin triode
THD @ 1V RMS  
Frequency Response 5Hz - 50kHz (+0dB/-0.5dB)
Hum and Noise Better than -80dB
Line Stage Gain 15dB
Recommended Minimum Load 50 k Ohms
Inputs 5 × Line level﹡,2 × Buffered tape loops
Power Consumption 15VA maximum

 

﹡Note:Phono input is line level unitl optional phono stage is added

   Note:The right is reserved to alter performance, specification and appearance as required

Sản phẩm khác