The Q-130 is a single channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.
Professional long throw slide faders with a fader range switchable from 6dB to 12dB allow for precise adjustments allowing you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-130 is housed in a 2U 19” rackmount chassis and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. A ground lift switch can eliminate earth loop or hum issues. Power is supplied via an IEC connector.
|
SPECIFICATIONS
|
| POWER SUPPLY |
|
| OPERATING VOLTAGE |
100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz |
| POWER CONSUMPTION |
12W |
| MAINS CONNECTION |
IEC receptacle |
| INPUT/ OUTPUT |
|
| CONNECTORS |
1/4" TRS, female XLR(pin 2 hot) |
| INPUT IMPEDANCE |
Balanced 20k ohm,unbalanced 10k ohm |
| MAX INPUT LEVEL |
>+21dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| TYPE |
Impedance-balanced/unbalanced,RF filtered |
| OUTPUT IMPEDANCE |
Balanced 100 ohm,unbalanced 50 ohm |
| MAX OUTPUT LEVEL |
>+21dBu balanced/ unbalanced |
| SYSTEM PERFORMANCE |
|
| BANDWIDTH |
20Hz to 20kHz, +0.5/-1dB |
| DYNAMIC RANGE |
108 dB |
| SIGNAL-TO-NOISE |
90 dB |
| THD + NOISE |
<0.004% |
| INTERCHANNEL CROSSTALK |
<-80dB, 20Hz to 20kHz |
| FREQUENCY RESPONSE |
<10Hz to >50kHz, +0.5/-3dB |
| FUNCTION SWITCHES |
|
| EQ BYPASS |
Bypasses the graphic equalizer
section in the signal path |
| LOW CUT |
Sweepable with rotary control from 10Hz - 200Hz |
| RANGE |
Selects either +/- 6dB or +/-12dB slider boost/cut range |
| SOFT LIMIT |
Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier |
| DIMENSIONS/WEIGHT |
|
| DIMENSION |
482.6 x 170 x 88 mm |
| WEIGHT |
4.0 kg |
|
