Q-230 Equalizer

Constant Q filters Switchable 6dB / 12dB fader range Switchable bypass with LED indicator Four LED output level meter plus input clip indicator Sweepable 40Hz -100Hz 12dB/oct HPF Input gain adjustable between -inf dB and +6dB. Built in soft limit helps prevent overloads that damage speakers. XLR/ 1/4” TRS balanced/unbalanced inputs/outputs. 20mm faders for precise adjustment in compact chassis. Ground lift switch quickly solves earth loop and external noise issues.

The Q-230 is a dual channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.

A fader range switchable from 6dB to 12dB helps you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-230 is housed in a 2U 19” rackmount chassis and and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

SPECIFICATIONS
MODEL Q-230
POWER SUPPLY  
OPERATING VOLTAGE 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
POWER CONSUMPTION 12W
MAINS CONNECTION IEC receptacle
INPUT/ OUTPUT  
CONNECTORS 1/4" TRS, female XLR(pin 2 hot)
INPUT IMPEDANCE Balanced 20k ohm,unbalanced 10k ohm
MAX INPUT LEVEL >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
TYPE Impedance-balanced/unbalanced, RF filtered
OUTPUT IMPEDANCE Balanced 100 ohm,unbalanced 50 ohm
MAX OUTPUT LEVEL >+21dBu balanced/ unbalanced into 2k ohm or greater
SYSTEM PERFORMANCE  
BANDWIDTH 20Hz to 20kHz, +0.5/-1dB
DYNAMIC RANGE 108 dB
SIGNAL-TO-NOISE 90 dB
THD + NOISE <0.004%
INTERCHANNEL CROSSTALK <-80dB, 20Hz to 20kHz
FREQUENCY RESPONSE <10Hz to >50kHz, +0.5/-3dB
FUNCTION SWITCHES  
EQ BYPASS Bypasses the graphic equalizer section in the signal path
LOW CUT Sweepable with rotary control from 20Hz – 100Hz
RANGE Selects either +/- 6dB or +/-12dB slider boost/cut range
SOFT LIMIT Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
DIMENSIONS/WEIGHT  
DIMENSION 482.6 x 168 x 88 mm
WEIGHT 3.93 kg

Sản phẩm khác